Big discounting 200l Silicone Heater - Insulation Jacket for Bolier, Furnace and Tank Reactor – PAMAENS TECHNOLOGY Detail:
Specification |
|
Item Name |
|
Item No. |
PM-IJFT |
Dimensions |
Customized |
Max. Operation Temp: |
1150 Deg C |
Thickness: |
5-150mm (could be customized) |
Construction |
Three to five layers |
Material attributes |
Water, oil and acid resistance |
Thermal conductivity |
0.035 W/M•K- 0.045 W/M•K±0.005 (Normal temperature) |
Everage energy saving rate |
25% to 40% |
Normal lifetime |
5 years |
Packaging |
Carton box / fumigation free wooden case |
Warranty |
One Year |
Material |
|
Liner |
Glass fiber / ceramic fiber / SS braided cloth/ Teflon cloth / High-silica cloth etc depending on the operation temperature |
Filling material |
Glass fiber insulation blanket / ceramic fiber insulation blanket / aero gel insulation blanket etc |
External layer |
Silicone coated glass fiber cloth / Teflon cloth |
Sewing thread |
High temperature resistance aramid thread |
Accessories Information |
|
Fittings |
Velcro, straps, clips, spring and hook etc |
Introductions of Insulation Jacket for Boiler, Furnace and Tank Reactor |
|
Furnaces or boilers are big containers which full of liquids such as chemical raw material, water, etc, which should be heated for industrial usage. During heating, the surface temperature of the furnace or boilers turns very high, which dispatch the heat into air directly and waste electricity. Our insulation jackets could prevent heat loosing and protect the furnace or boilers, and lower the temperature of workshop. The energy saving rate is more than 25%. Our insulation jackets are tailored according to the furnace or boiler or tanks, which could fit for the furnace or boiler perfectly. Besides saving energy, with our insulation jackets, your furnace or boiler or tanks will be more nice and durable. |
|
The types of Insulation Jacket for Boiler, Furnace and Tank Reactor |
|
A) Cold insulation type |
|
B) Low temperature insulation type (below 300℃); |
|
C) Standard type (300—600℃). |
|
D) High temperature insulation type (above 600 C). |
|
The features of Insulation Jacket for Boiler, Furnace and Tank Reactor |
|
Thermal conductivity: 0.035 W/M•K- 0.045 W/M•K±0.005 (Normal temperature) |
|
Temperature tolerance: high temperature tolerance: 1000-280℃, low temperature tolerance 70℃ |
|
Inflaming retarding: non flammable (Fireproof A class, GB8624-2006, German standard DIN4102, A1 class) |
|
Density: 110-220Kg/m |
|
Thickness: 5-150MM |
|
Moisture absorption rate: <5% |
|
The applications of Insulation Jacket for Boiler, Furnace and Tank Reactor |
|
Barrel heater on injection molding machine, extruder etc. |
|
Molds and dies |
|
Flange, Pipe, Valve |
|
Exhaust Elbow |
|
Heater exchanger |
|
Exhaust pipe of engine |
|
Any other applications needed to reduce heat loss |
|
Advantages of Insulation Jacket for Boiler, Furnace and Tank Reactor |
|
Minimize heat loss by 20%-40% |
|
The surface temperature can be lowered to 40℃, and thus safe to touch by hands |
|
We support customized design to ensure 100% fit your application |
|
Easy to install by buckles |
|
Water and oil proof, multi-layer protection, anti-corrosion, easy to clean, easy to bend, pollution free and neat out looking. |
|
Dimension, cut/hole sizes and positions are required for quotation. Drawings and pictures are preferred. |
|
RFQ |
|
1. Dimensions or drawing of the equipment which will be covered |
|
2. Surface temperature of the equipment |
|
3. Thickness of the thermal insulation jacket or blankets |
Product detail pictures:
Related Product Guide:
Tank Water Heaters: An Introduction
Tips For Safely Using Drum Heaters
Big discounting 200l Silicone Heater - Insulation Jacket for Bolier, Furnace and Tank Reactor – PAMAENS TECHNOLOGY, The product will supply to all over the world, such as: , , ,
By from -
By from -