Hot Selling for Crazy Selling Coil Heater Tubular Heater - Cast in Heater – PAMAENS TECHNOLOGY Detail:
Specification |
|
Item Name |
Cast-in Heater |
Item No. |
PM-CIB |
Voltage |
110~650 V, 1 or 3 phase |
Wattage |
Customized |
Construction |
Ordinary, air cooled, water cooled |
Standard Thickness |
1 inch (could be customized) |
Maximum wattage density |
5 w/sq cm |
Sheath temperature |
600°C |
Max. operating temp: |
600°C |
Wattage tolerance |
+/- 5% |
Certificates |
CE, RoHs |
Packaging |
Fumigation free wooden case |
Material |
|
Heating tube |
Stainless steel 304 tube with Cr20Ni80 |
Insulation material |
Aluminum, brass, bronze,iron |
Water tube |
Stainless steel 304 tube (just for water cooled band heater) |
Accessories Information |
|
Connection |
Connection box, explosion proof connection box, ceramic wiring block, binding posts, plugs etc |
Shrouds |
Stainless steel 304 (just for air cooled band heater) |
Air cooling fan |
Available (just for air cooled band heater) |
Introductions of Cast in Heaters |
|
Cast in Heaters combine top quality tubular heaters and high thermal conductivity non-ferrous alloys. The heating elements are tested 100% before and after casting. Modern foundry techniques ensure a dense, porosity free casting. After casting the heaters are machined to ensure a close contact on the working surface. Cast In heaters can be supplied with clamping straps or with built in clamping means. |
|
The feature of Cast in Heaters |
|
Temperature: Aluminum alloy up to 400℃, brass alloy up to 650℃, |
|
Watt Density: Aluminum alloy – 35 w/sq in on heater elements, Brass alloy – 45 w/sq in on heater elements |
|
Voltage: Up to 480 volts – Single and three phase |
|
Roller Size: 2″ diameter and up. 1-1/2 width and up (in 1/2″ increments) |
|
Terminal: 1/4 to 20 Post terminals standard |
|
Shealth: Stainless Steel |
|
Mounting Collars:1/4, 3/8, 1/2, 5/8, 3/4Designed Specially for Hot Stamping Efficient |
|
Efficient Heat Transfer |
|
Cast-in heaters can be supplied with cooling tubes & end fitting |
|
Various Heater terminations |
|
Uniform surface temperatures |
|
The applications of Cast in Heaters |
|
Injection and Blow Mould |
|
Extruders |
|
Moulds & Dies |
|
Packaging machinery |
|
Lab equipments |
|
Attributes of Cast in Heaters |
|
Insulation types: Aluminum, brass and iron |
|
Shapes: Band type and flat type |
|
Heating and cooling: Air cooling cast in aluminum/brass heater, cast in water cooling aluminum/brass heater, ordinary cast in aluminum/brass/iron heater |
|
Heating type: Inner heating and outer heating |
|
RFQ |
|
1. Diameter, width, and thickness |
|
2. Voltage & wattage |
|
3. Connection type |
|
4. Wire length if have |
|
5. Position of thermocouple holes if have |
|
6. Types: cast band heater, air cooled band heater or water cooled band heater |
|
7. Quantity |
Product detail pictures:
Related Product Guide:
Choosing a Fish Tank Heater
Tips For Safely Using Drum Heaters
Hot Selling for Crazy Selling Coil Heater Tubular Heater - Cast in Heater – PAMAENS TECHNOLOGY, The product will supply to all over the world, such as: , , ,
By from -
By from -